ERAZ61A Magnesium Welding Rods Blue Demon

ERAZ61A magnesium welding alloy is a good
choice when welding magnesium base metals
of similar chemical composition. It produces
superior joints with the maximum tensile
strengths offered by these alloys. Cleanliness
of both the filler metal and base metal is extremely
important when welding with magnesium.
Flux is NOT required for TIG or MIG
welding processes of ERAZ61A magnesium
alloy. Although Oxy-acetylene welding of this
alloy is uncommon it can be done and should
be limited to single-pass welding on thin
gauge magnesium materials.

AWS Specification
ANSi/AWS A5.19-92 (R2006)
AWS Classification ERAZ61A

Welding Current
GTAW - AC/DCEP
GMAW - DCEP

Typical Wire Chemistry
Al 5.8 - 7.2
Be 0.0002 - 0.0008
Mn 0.15 - 0.5
Zn 0.40 - 1.5
Cu 0.05
Fe 0.005
Ni 0.005
Si 0.05
Mg REM
OTHER 0.30

Typical Mechanical Properties
(As Welded)
Yield Strength, ksi 30
Tensile Strength, ksi 44
Elongation%, min 16
Brinell Hardness 60
Melting Point °F 1140

Available diameters MIG and
suggested Operating Range in Amps
.040" 25 - 50
1/16" 70 - 175
3/32" 115 - 210

Available Diameters TIG and
suggested Operating Range in Amps
3/32" 35 - 125
1/8" 160
5/32" 175